4B P3003V34AI Instrukcja obsługi - Strona 6

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Akcesoria 4B P3003V34AI. 4B P3003V34AI 16 stron. Inductive proximity sensor

Drukuj stronę

• Rotating machinery can cause serious injury or death

• Always lockout and tagout the machine prior to installation

The P300 is an inductive sensor designed to detect shaft speed, shaft position, gate position, or object

presence. No contact is made between the sensor and the object being monitored.

Maximum range of ferrous targets is 8 mm (5/16") and for non-ferrous targets is 5 mm (6/16"), assuming a

20 mm (3/4") diameter target. Smaller targets may be used but operating distances will be reduced.Three

different sensor outputs are available.

P3003V10AI and P3004V10AI sensors have a two-wire interface and have an internal transistor which

either switches to open or closed state when target is present (see page 10). P3003V34AI has an isolated

transistor and the output is determined by the orientation of the positive and negative supply connections

(page 10).

All units are fully encapsulated and come with a 3m cable lead. Two LED's show power supply and input

status.

Supply Voltage:

Supply Fusing:

Switching Capacity:

Saturation Voltage:

Leakage Current:

Ambient Temperature:

Output State:

Sensing Range:

Input Pulse Range:

Enclosure:

Relative Humidity:

LED Indicators:

Connections:

Protection:

WARNING

PRODUCT OVERVIEW

SPECIFICATIONS

P3003V10AI and P3004V10AI: 24 - 240 VAC/VDC

P3003V34AI: 10-30VDC

Supply to be fused at 500mA maximum. Note: fuse must be 1500A capable.

1 fuse per sensor MUST be used.

P3003V10AI and P3004V10AI: 100 mA maximum

P3003V34AI: Opto-isolated transistor, 30VDC, 100mA max

P3003V10AI and P3004V10AI: 5.5 Volts maximum (output on)

P3003V34AI: N/A

P3003V10AI and P3004V10AI: 1.0 mA maximum (output off)

P3003V34AI: N/A

-13°F (-25°C) to +122°F (+50°C)

See page 10

8 mm (5/16") maximum on ferrous metal at 77°F (25°C)

5 mm (6/16") maximum on non-ferrous metal at 77°F (25°C)

10 to 3,600 pulses per minute (PPM) maximum

Nylon - ISO threaded 30 mm by 1.5 mm pitch

90% RH

Red - Target Sensed

2 wire (P3003V10AI, P3004V10AI)

4 wire (P3003V34AI)

Cable Length - 3m

IP66

PAGE 6