APLIC 20200730SZ002 Podręcznik użytkownika - Strona 7

Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Obudowa APLIC 20200730SZ002. APLIC 20200730SZ002 20 stron. Hard disk enclosure, usb 3.2 gen1 , m.2

Drukuj stronę

Then place the adapter along with the mounted hard drive back in the enclosure

and screw the cover back on. In order to connect the device, you have to push the

USB 3.2 Gen1 connector out using the slider and connect it to a USB port on your

computer. The drive should now appear, e.g., in Explorer or be configurable under

disk management.

4. Safety instructions and liability disclaimer

Never try to open the device to carry out repairs or conversions. Avoid contact

with mains voltages. Do not short-circuit the product. The device is not certified

for use in the open air; only use it in dry conditions. Protect it from high humidity,

water and snow. Keep it away from high temperatures. Do not subject the de-

vice to sudden changes in temperature or heavy vibration as this might damage

electronic components. Examine the device for damage before using it. The unit

should not be used if it has received an impact or has been damaged in any other

way. Please observe national regulations and restrictions. Do not use the device

for purposes other than those described in the instructions. This product is not a

toy. Keep it out of the reach of children or mentally impaired persons. Any repair or

alteration to the device not carried out by the original supplier, will invalidate the

warranty or guarantee. The product may only be used by persons who have read

and understood these instructions. The device specifications may change without

any separate prior notice to this effect.

English