APLOS R0-N5050 Instrukcja obsługi - Strona 8
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Systemy filtracji wody APLOS R0-N5050. APLOS R0-N5050 20 stron. 5 stage reverse osmosis drinking water system, 50gpd
Drukuj stronę5. Installation Instructions
BEFORE INSTALLATION CAREFULLY READ INSTRUCTIONS
This product should be used with cold water supply only!
1) Check that all parts are in the package.
2) Before installation, please check incoming water pressure, tank pressure and
inlet water temperature. In certain installations the use of a PRV valve and surge
vessel may be required.
3) Make sure feed water quality complies with the requirements from section 2. If
feed water quality does not meet the requirements, consult with a water treatment
specialist.
4) Before installing the system, make sure there is enough space for both the filter
rack and the pressure tank under the sink. In case there is not enough available
space, pres- sure tank can be placed in separately. Yellow tube's length is sufficient
to connect it to the rest of the system.
5) Electrical safety notice: This appliance should be connected into a circuit with
an RCB installed. Please note voltage requirements. The unit is to be supplied with
single-phase 230 VAC, 50 Hz electrical power.The system is supplied with power
cord and can be connected to a properly installed IEC 60884-1 compliant socket.
6) Once installation has been completed and operational ensure that all fittings,
pipework, and unit has been checked for any drips and leakage.
Always ensure unit is fitted in a safe and correct manner as outlined by this manual
This system has been tested by the manufacturer for leaks, so within the
NOTE:
system the presence of residual water is allowed. This system should be in -
stalled away from direct sunlight and heating appliances.
8