4CR ECO IR 3 Instrukcja obsługi - Strona 7

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Suszarka 4CR ECO IR 3. 4CR ECO IR 3 11 stron. Infrared dryer

1. Connect the electricity. The supply cable must be at least

Make sure the supply voltage and frequency are as specified correspond to the type

plate of the device.

2. Switch on the device, symbols are displayed.

3. Set the distance between the device and the workpiece. Usually a distance of 30 – 60

cm is to be kept.

4. Select drying mode. (Pulse drying achieves a better gloss)

5. Set time and temperature according to the manufacturer's specifications of the

applied materials to achieve the desired result .

Watch out! Device heats up during use. Injury and fire hazard!

Switch off the appliance after use. Store the device in a safe place to avoid

damage.

Mount device

Digital display

30-60cm

Place the heat source at

a distance of 30 – 60 cm

parallel to the surface

5. Operation

Connect power

supply

Choose a drying

mode

Turn off

4mm² at 230V.

Turn on

Set temperature

and time