DURAVIT Inipi Instrukcja obsługi - Strona 11
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Produkt hydrauliczny DURAVIT Inipi. DURAVIT Inipi 19 stron.
Również dla DURAVIT Inipi: Instalacja wstępna (10 strony)
Drukuj stronę
> Select the scenario you wish to change.
> Select the setting you wish to change.
> Now you can change the setting: Follow the instructions given under the individual
functions.
... once / during a sauna session
Prerequisite: Scenario is switched off.
All functions (heater, music, lighting) can be changed. Follow the instructions given
under the individual functions.
7.6
Changing a scenario name*
> Select scenarios > change.
> Select the scenario you wish to change.
> Select change name.
"Enter scenario name" is displayed on the control panel.
> Press the "up" or "down" button until the correct character is displayed.
> Press the "right" button to select the next digit.
> Repeat the last two steps until you have entered the desired scenario name.
> Press the "OK" button to confirm.
The scenario name is stored.
7.7
Resetting a scenario*
> Select scenarios > change.
> Select the scenario you wish to change.
> Select reset.
> Press the "OK" button to confirm that you really do want to reset the settings.
Settings for the selected scenario are all reset to their defaults.
7.8 Switch on the heater
... with preset bathing settings
> Select heater.
> Select the desired bathing settings.
The heater heats up.
20
*only possible in Home mode
... with manual temperature selection
> Select heater > manual
An X-Y coordinate axis is displayed.
> Press the "up" or "down" button to set the temperature.
> Press the "right" or "left" button to set the relative humidity.
> Press the "OK" button.
The heater heats up.
Relative humidity of between 0% and 50% can be selected manually depending on
the temperature. A failure report is displayed and the value turns red if you move
outside of the permitted range.
Switching the heater timer on
Danger!
The heater is a fire hazard!
> Make sure that there are no objects
on the protective grille of the heat inlet or
in front of the air supply opening for the heater.
> Select heater > timer.
"Enter start time:" appears on the display.
Enter the time at which the heater should be turned on, as follows:
> Press the "up" or "down" button until the first digit of the time is displayed.
> Press the "right" button to select the next digit.
> Repeat those last two steps until the correct time is displayed.
> Press the "OK" button to confirm.
A coordinate axis is displayed to set the desired temperature.
> Press the "up" or "down" button to set the temperature.
> Press the "right" or "left" button to set the relative humidity.
> Press the "OK" button.
The timer symbol appears in the display, and the start time appears in the drop-
down menu.
The sauna must remain on and the door closed in order to be able to start the
heater using the timer!
21