Apogee Symphony I/O Mk II SoundGrid Podręcznik użytkownika - Strona 17
Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Sprzęt nagrywający Apogee Symphony I/O Mk II SoundGrid. Apogee Symphony I/O Mk II SoundGrid 20 stron. For units equipped with the wsg option card
Drukuj stronę
Monitor
Use this section of the Outputs tab to select and control the Headphones and Main speaker outputs.
c. 2 & 3 Speaker Sets : Analog Out 1/2, 3/4 and/or 5/6 are configured as two or three pairs of stereo
outputs. Switch between the stereo pairs with the Speaker Sets buttons. These outputs are
adjusted simultaneously with the Speaker Out level knob.
d. 5.1 (Out 1-6) & 7.1 (Out 1-8) & 9.1 (Out 1-10) : Analog Outputs 1-6, 1-8, or 1-10 are configured as
speaker outputs, suitable for connection to a 5.1, 7.1, or 9.1 speaker system. These outputs are
adjusted simultaneously with the Speaker Out level knob.
7. Speaker Out level - When analog outputs are configured as speaker outputs, this knob controls the
output level.
8. Speaker Out Mute - Mute the analog outputs to speakers
9. Speaker Out Dimm - Reduces the listening level by -15dB
10. Speaker Out Sum-to-Mono - Collapse the left and right signals to mono at the output. This combined
signal is sent to the analog outputs to speakers and is useful for verifying the mono-compatibility of a
stereo mix.
11. Speaker Sets buttons - When 2 or 3 speakers sets are selected, use these buttons to choose which
stereo set is active.
APOGEE SYMPHONY I/O MK II SOUNDGRID USER'S GUIDE
1. Headphones Source - Selects the output pair that is sent to the
Headphones output.
2. Headphones Level - Controls the level of the front panel Headphones jack.
3. Headphones Mute - Mute the Headphones output
4. Headphones Dimm - Reduces the listening level by -15dB
5. Headphones Sum-to-Mono - Collapse left and right signals to mono at the
output. This combined signal is sent to the Headphones output and is
useful for verifying the mono-compatibility of a stereo mix
6. Speaker Out Selection - The analog outputs may be configured for use
with active speakers or a power amp/passive speaker combination.
a. Line : Analog Out 1/2 are configured as line outputs.
Functions such as level control, Mute, Dim, and
Sum-to-Mono are disabled.
b. Stereo : Analog Out 1/2 are configured as speaker
outputs (with all monitor functions available).
Page 17