DURAVIT Architec 700353 Instrukcja montażu - Strona 5
Przeglądaj online lub pobierz pdf Instrukcja montażu dla Wanny DURAVIT Architec 700353. DURAVIT Architec 700353 7 stron. Tiled bathtub (niche)
Również dla DURAVIT Architec 700353: Instrukcja montażu (12 strony)
Drukuj stronę
1
2
1
Inspect tub for any potential damage that
Place cardboard or blanket on the floor and
may have occured during transport.
turn tub over.
4
5
DANGER!
Affix 6 flange clips to the wall frame to pro-
vide top side support of the tub.
Fatal injury by electric shock. Make sure that
there are no electrical wires or heating run-
ning under the floor, which could be affected
by the installation of tub.
8_Architec_14.7.17
3
Connect tub waste and overflow ( see page
10-11 for instruction.
6
x6
Set tub into designated frame area and
connect tub drain to rough in. Fill the tub
with water insecpt for water leaks.
7
Once tub is set, finish wall and tile and apply
silicone as needed.
9_Architec_14.7.17