Dash DNMWM400 Podręcznik - Strona 7
Przeglądaj online lub pobierz pdf Podręcznik dla Gofrownica Dash DNMWM400. Dash DNMWM400 17 stron. No-drip waffle maker
Drukuj stronę
TROUBLESHOOTING
ISSUE
SOLUTION
How do I know when the No-Drip
When the No-Drip Waffle Maker reaches the optimal tem-
Waffle Maker is heated and ready
perature, the Green Indicator Light will illuminate and this
to use?
means that you're ready to get cooking.
There is no On/Off button. How do
To turn on the appliance, simply plug in the power cord.
I turn the No-Drip Waffle Maker off
When you're done cooking, turn off the appliance by un-
and on?
plugging the No-Drip Waffle Maker.
Yes, this is completely normal. When using your No-Drip
When using my No-Drip Waffle
Waffle Maker, always lift and lower the Cover by the Cover
Maker, the Cover gets very hot. Is
Handle. To prevent personal injury, DO NOT lift the Cover
this normal?
so that your arm is over the Cooking Surface as it is hot and
may cause injury. Lift from the side.
12 ∙ troubleshooting
ISSUE
SOLUTION
There is probably an accumulation of burnt food residue
on the Cooking Surfaces. This is normal, especially when
cooking with sugar. Allow the appliance to cool fully, pour
After using my No-Drip Waffle
on a little cooking oil and let sit for 5–10 minutes. Scrub the
Maker a few times, food is starting
Cooking Surface with a sponge or soft bristled brush to
to stick to the surface. What is
dislodge food. Use a damp, soapy cloth to wipe down the
happening?
Cooking Surface. Rinse the cloth and wipe again. If food re-
mains, pour on more cooking oil and let sit for a few hours,
then scrub and wipe clean.
Using more batter than is recommended may result
in overflow. The No-Drip Waffle Maker is designed to
There is batter overflowing from
accommodate a certain amount of overflow into the edges
the edges of my No-Drip Waffle
surrounding the Cooking Surface. Use no more than 1
Maker, what is happening?
½ cups of batter per batch of 4 waffles in order to avoid
overflow coming from the appliance.
Ensure that the power cord is plugged into the power
The Indicator Light will not turn on
outlet. Check to make sure the power outlet is operating
and the Cooking Surface is failing
correctly. Determine if a power failure has occurred in your
to heat.
home, apartment or building.
troubleshooting ∙ 13