Apollo SA4705-706APO Instrukcja instalacji
Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Jednostka sterująca Apollo SA4705-706APO. Apollo SA4705-706APO 8 stron. Nac module
APD0834 / 2021 / ISSUE 3
INSTALLATION GUIDE
SOTERIA UL
NAC MODULE
GENERAL
The NAC Module monitors and controls a circuit of alarm notification appliances or speakers. It is
mounted on a plastic face plate for use with a UL listed 4" square or 2 gang electrical box (minimum
depth 2⅛"). The module requires a separate 24V DC supply to power notification appliances.
In addition to individual NAC Module operation, multiple modules can be controlled simultaneously as a
group*. A green LED flashes in synchronization with the current pulse reply from the device.
Please Note:
•
*Physical group addressing feature is only available in XP95/Discovery Protocol.
The NAC Module is designed for indoor dry use only .
•
CONTROL PANEL COMPATIBILITY
The NAC Module has been approved by UL, LLC. For details of compatible panels contact Apollo
America Inc. For NAC circuit, contact Panel manufacturer for compatibility details
TECHNICAL INFORMATION
All data is supplied subject to change without notice. Specifications are typical at 24V, 25°C and 50% RH
unless otherwise stated.
Part Number
Replacement Part Number
Type
Dimensions
Temperature Range
Humidity
Signal Line Circuit (SLC)
Operating Voltage
Modulation Voltage
Supervisory Current
LED Current
Maximum Loop Current
Approvals
Material
Max Standby Current (Pulsing LED)
Max Surge Alarm Current (LEDs on)
Wire Range
SA4705-706APO
55000-825
Sounder Control Module
4.9" width x 4.9" height x 1.175" depth
32°F to 120°F (0°C to 49 °C)
0 to 95% RH (Non-Condensing)
Supervised
17-28V DC
5-9 V (peak to peak)
<700 µA
1.6mA per LED
1A
UL, ULC, CSFM, FM
UL 94 V-0
2.96 mA
4.8 mA
12-24 AWG
1