4Ddoors GA403 Jak programować - Strona 3
Przeglądaj online lub pobierz pdf Jak programować dla Otwieracz drzwi garażowych 4Ddoors GA403. 4Ddoors GA403 3 stron.
Drukuj stronęHOW TO SET LIMITS AND FORCE
TA2
A.
Make sure the door is connected to the motor
B.
Press and hold the black button for 6 seconds until you see an L on the display then release it
C.
Put the door in the open position using the white button (door open) and the red button (door close)
D.
Confirm open position by pressing the black button once
E.
Door will perform 4 - 5 test operations automatically
F.
Door now should work correctly
GA
GA
203
403
Coding Instructions
v3 (2 PIN receiver)
TA2
2
1
TO CODE NEW REMOTES YOU NEED
TO DO THE FOLLOWING:
0
Open motor cover (lid).
1
Push the
RED
button on the circuit board once.
The little display will light up with a lower caps r
2
and 1.
Hold down the button on the remote until LED
3
lights on motor start going brighter.
4
Then release the button of the remote.
Your remote should be coded, press button
5
to test.
DELETE CODING
Push the
RED
button on the circuit board and hold
for 10 seconds, a count down will start from 8 to 0,
1
dE will appear on display when it finishes, please
release the button.
2
Please test your remote
3
4
Art Series
Handset
FOR HOME AND INDUSTRY