DuraWatt DS12VD Podręcznik użytkownika - Strona 4

Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Zasilanie DuraWatt DS12VD. DuraWatt DS12VD 6 stron. 140-watt dc-dc 12 volt power supply

1.9.

Detailed Connection Diagram

P1 P2
D8
J2
JP1
Power Input
J8
Gnd:
Vin:
Acc:
F1
Input Fuse:
Power Output
J6
Vout:
J10
Vout:
J1
FAN:
Control
JP1
Pins G1, G2:
Pins F1, F2:
Pins E1, E2:
Pins D1, D2:
Pins C1, C2:
Pins B1, B2:
Pins A1, A2:
P1*
Countdown Adj: In Basic Mode, clockwise rotation adds time to the Countdown Timer (0-20m)
P2*
Low Voltage Adj: In Basic Mode, clockwise rotation raises the low voltage threshold (10V-12V)
D8
LED indicator:
J2
Serial Port:
*Note: Do Not Over-Turn P1 and P2, only 270 degrees is available
DSX12VD Manual
J1
Ground Input, connect to the chassis or the (–) battery terminal
+12 Volts Input, connect directly to the (+) battery terminal
Accessory Input, Connect to a switched +12 volt supply wire (ignition or fuse box)
15-Amp mini-automotive fuse (yellow)
0.25" Faston Spade 12-volt output connection
4-pin 12-volt output connection (Molex: 39-31-0040)
Connects to a 12 Volt 3-pin fan to cool the DSX12VD
Connects to Motherboard Power Switch Header (G2=Signal +, G1 Signal -)
Aux Connection (for Amp Enable or Slave Power Supply (F1= Open Collector)
On_Sense (connect to any 5 volt line to detect when computer is on/off)
User Switch (will zero countdown timer when shorted)
User1 (RESERVED)
User0 (RESERVED)
A1=+5V, A2=nReset (RESERVED)
Indicates Operation, Timer States, and Faults
Enables Advanced Modes, field upgrades, and diagnostics
Copyright 2006 Mpegbox.com
J6
J10
J8
F1
Page 4 of 6