4EVAC 4E-FMTC Instrukcja instalacji i obsługi - Strona 10

Przeglądaj online lub pobierz pdf Instrukcja instalacji i obsługi dla Mikrofon 4EVAC 4E-FMTC. 4EVAC 4E-FMTC 17 stron.

Hacousto Holland bv

Industrieweg 87

2651BC Berkel & Rodenrijs

4E-FMTC installation and user guide

LED indicators

Indicates operating status of this station.

Continuous: device is powered and ready

Blinking fast: station is booting or not operational

Indicates that the system is in the Voice Alarm state, where at least one zone in the system is occupied by

an emergency audio signal, i.e. a pre-recorded EVAC MESSAGE or LIVE EVAC, when a fireman microphone

is being used.

Continuous: EVAC state

Indicates that the system is in FAULT condition (general fault indicator), where at least one device in the

system is reporting a fault.

Continuous: when a local station fault is detected

Blinking slow: when the local station is healthy and at least one remote device is reporting a fault

state

5.1.4. BUSY – blue LED

Zone busy LED. Indicates the current status of zones addressed by this microphone station.

Blinking fast: the set of zones is occupied by an audio signal, but is in SILENCE mode (triggered by

SILENCE input or manual SILENCE button)

Blinking slow: indicates that the set of zones are currently transmitting an audio signal (except

BGM) from another device.

Blinking double: indicates that the set of zones is currently transmitting audio signal from this

microphone station.

NOTE: BGM transmission is not indicated.

Page 10 of 17

Boot sequence

No communication

with main unit

Wrong Device ID

Microphone short or open circuit

PTT button short or open circuit

Network link fault

Author:

LED indication time chart

OFF

Blink slow

Blink double

Blink fast

continuous