DURHAND B72-038 Podręcznik - Strona 15

Przeglądaj online lub pobierz pdf Podręcznik dla Przechowywanie narzędzi DURHAND B72-038. DURHAND B72-038 17 stron. Seven-in-one workbench
Również dla DURHAND B72-038: Korzystanie z instrukcji (17 strony)

Drukuj stronę

1.Release all legs from their locking position, then rotate each pair of legs until

you can't move them anymore.

2.Ensure the gusset brace is locked by pulling it up. Repeat for all the other

gusset braces.

3.Pull the handle up in the same way as the hand truck mode, then release the

tool tray from its locking position. Put the tool tray on the top of the handle,

forming a platform. FOR THIS MODE, THE LOADING CAPACITY FOR THE

TOOL TRAY IS 2KGS(4.5LBS).

4.Hang the hook on the handle - it can be used to hang tool bags when working.

WARNING:

DON'T USE SCAFFOLD/PLATFORM MODE WITH LEGS

FULLY EXTENDED.

The inner legs are not designed to be used in this function.

Workbench & Sawhorse mode

1.Set up the legs by following the same steps as the scaffold mode section.

2.Push the snap buttons on the side of each leg to release them, then pull the

inner legs out to the workbench height. When legs are fully extended, they will

snap into place. Gently turn the workbench upright onto a stable, level surface.

-15-