Durite 0-776-14 Instrukcje
Przeglądaj online lub pobierz pdf Instrukcje dla Kamera bezpieczeństwa Durite 0-776-14. Durite 0-776-14 2 stron. Rear view twin ccd i/r colour cctv camera
Drukuj stronę
Rear View Twin CCD I/R Colour CCTV Camera
Before using this unit please read these instructions carefully. Take special care to follow
the warnings and safety suggestions listed below. Keep these instructions for future refer-
ence.
There are no user-serviceable parts within the unit, refer servicing to qualified service
personnel.
• Please ensure you are familiar and comply with local traffic and driving regulations.
• Connection - The camera should only be connected to a Durite cctv system.
• Heat - Do not install the camera near heat sources.
• Mounting - Ensure the camera is facing the desired direction before fixing the camera
base. If fixing to isolated return chassis the camera bracket should be isolated from the
vehicle chassis.
• Service - The user should not attempt to service these units beyond that described in these
instructions. All other servicing should be referred to an authorised service technician.
The camera has two CCD image sensors which gives a high quality picture and its solid
state circuitry provides extremely long life. Compact size and single connection make it
easy to install. Automatic gain control (AGC) provides a clear image in both strong sunlight
and low light conditions, if lighting conditions fall below a set level the Infra-red LEDs will
illuminate. It is recommended that all camera lead connections are additionally sealed by
either wrapping with a suitable tape or application of heat shrink sleeving. It is recommend
to connect the system and test before fixing to ensure the correct field of view is displayed.
Part 0-776-14
WARNINGS
PRECAUTIONS
GENERAL
www.durite.co.uk
0-776-14-LEAF