Durite 0-875-05 Instrukcja instalacji i obsługi - Strona 6

Przeglądaj online lub pobierz pdf Instrukcja instalacji i obsługi dla Aparat cyfrowy Durite 0-875-05. Durite 0-875-05 14 stron.

Installing the camera(s)

CAM1 should be installed facing forwards from the front windscreen to give a "driver's eye" view of

the road ahead. For cars and vans the posiDon typically used is behind the rear view mirror as shown

below. Ensure that any adjustments made to the mounDng are secure to prevent the camera from

DlDng or poinDng away from the intended focus area.

OpDmally, forward facing cameras should be focused at an angle just below level with the road to

capture the area from the front of the bonnet to the horizon. If a camera is mounted outside of the

area of the windscreen cleared by the wipers, the image will be obscured during inclement weather

and blurry in direct sunlight.

If another camera is installed, it should be posiDoned to capture the target area as required (driver's

seat, rear interior, rear view, etc).

The angle and video quality should be checked and conﬁrmed during the commissioning process.

Installing the panic buUon

the telematics unit to the pins on the buUon. Do not wire the blue or black to any other

component, and take care not to confuse the black wire from the control unit and the black wire

for the buUon.

If you do not wish to install the panic buUon, ensure that the blue and black wires are secured in

such a way that they do not touch, and cannot touch any other metallic component.

Incident Cam | Installation & User Guide

The small push buUon included with the kit

funcDons as the system's "panic buUon". When

pressed it captures the last 10 and following 5

seconds of footage from the camera and

immediately uploads it to the cloud.

You may need to drill a small hole in the

vehicle's dashboard in order to mount the

buUon. It should be located in such a posiDon

where the driver can reach it without undue

distracDon from controlling the vehicle. A

screw arrangement on the buUon will grip the

dashboard and hold it in place.

The panic buUon is installed by connecDng the

blue and black wires leading directly from