Durite 0-875-15 Instrukcja instalacji i obsługi - Strona 8
Przeglądaj online lub pobierz pdf Instrukcja instalacji i obsługi dla Aparat cyfrowy Durite 0-875-15. Durite 0-875-15 14 stron.
Drukuj stronę
Guidelines for commissioning
1.
Start the vehicle
2.
Ensure that all the following LEDs are illuminated:
a.
Telematics unit: orange and green. The should illuminate and then begin flashing.
When first installed, the flashing should stop within five minutes and should
remain steady.
b.
WiFi dongle: blue and green. Both the blue and the green should both illuminate
and remain steady within one minute.
c.
Control unit: blue. Should illuminate and remain steady within one minute.
d.
Each camera: blue. Should illuminate and remain steady within one minute.
3.
If one or more of the LEDs are not illuminated, turn the vehicle's igniDon off and then
wait ten minutes before conDnuing.
4.
When all LEDs are illuminated and steady, leave the vehicle's engine running for at least
one minute.
5.
Press the panic buUon (if not installed, briefly touch the blue and black wires for the
panic buUon together) to trigger a video.
6.
Record the following informtion and forward this to the support team as soon as
possible.
- Camera serial number
- Registration of the vehicle
- IMEI of the telematics unit
7.
If at any step the LED lights are not as described, please examine the installation and
turn the vehicle fully off for 5 minutes. Then recheck following the steps above.
8.
Record the commission code given by the support team in order that any issues can be
quickly located and rectified.
Incident Cam | Installation & User Guide
8
of
9