AddSecure Asset Series Instrukcja instalacji - Strona 5

Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Akcesoria samochodowe AddSecure Asset Series. AddSecure Asset Series 14 stron.

3 Wiring for Asset PRO with one-wire temperature sensor

Asset Pro with temperature sensor(s) is supplied with the following wires:
Wire chart
Pin
Colour
1
Purple
2
Orange
3
Green
Black/Whit
4
e
5
Red/White
10
Blue
11
Grey
12
Brown
13
Black
14
White
Function
Note
Temperature
Dallas 1-wire – for temperature sensor
TX (RS 232)
Used for ThermoKing / Carrier
RX (RS 232)
Used for ThermoKing / Carrier
Not used
CAN
CAN
Not used
Outout
Not used
Input 2
Not used
Terminal 15
Ignition (has to be connected – if there is no ignition signal in
ignition
the vehicle connect the cable to terminal 30 +24 Volt)
Terminal 31
Battery minus terminal
ground
Terminal 30
Constant supply between +10 Volt for +60 Volt
+24 Volt
3