Data Signs PTL Remote Instrukcja obsługi i konserwacji - Strona 13
Przeglądaj online lub pobierz pdf Instrukcja obsługi i konserwacji dla Sprzęt bezpieczeństwa Data Signs PTL Remote. Data Signs PTL Remote 19 stron. Portable traffic lights
Drukuj stronęType 1 PTSS — Startup and Shutdown
using the PTL Remote
Type 1 PTSS — Self-Test using the
PTL Remote
SETTING THE RF CHANNEL ON THE REMOTE CONTROL.
To set the RF Channel on the Remote Control, follow these instructions.
1. Press the MENU button on the bottom of the screen to go to settings.
2. Press the RF Channel option.
3. Enter the new channel number.
4. To re-start normal operation, press the BACK button.
Select Type 1 Power On/Off from the menu.
To startup from shut down state, press the button on the
screen for 5 seconds. Alternatively, to startup from an inactive
state, use the same button and press for 5 seconds.
In shutdown state, the lights are disabled and the LCD's on the
PTL Controllers are turned off.
When the SELF TEST button is pressed, the following
sequence is run on the PTL Compact to test the aspects, on
any connected units:
Green signal, yellow signal, red signal and blank for 0.2
seconds.
Note: the Red and Green Times are reset to the default times
of Green = 1 Seconds, Red = 5 Seconds.
It is advisable that the self-test not be carried
out while the PTL Compact are setup on the
roadway.
P T L O P E R A T I O N S M A N U A L
13