DURKOPP ADLER 0867 590074 Instrukcje - Strona 3
Przeglądaj online lub pobierz pdf Instrukcje dla Akcesoria do maszyn do szycia DURKOPP ADLER 0867 590074. DURKOPP ADLER 0867 590074 4 stron. For fitting the reflecting light barrier
Drukuj stronę
Instructions for fitting the reflecting light barrier
1.
General information
1.1 Mounting kit
The complete kit for mounting and adjusting the reflected light barrier with the order number
0867 590074 consists of the following components:
light barrier
9815 920023
holder
0867 490030
reflecting foil
9815 920024
fastening clamp
9840 120025
washer
9330 000087
2.
Assembly
–
Remove the head cover.
–
Mount new head cover 0667 105164.
–
Screw light barrier 1 on holder 2 with the oval
head screws 3.
–
Place the connecting cable in the strain relief of
the holder.
–
Screw holder 2 with light barrier on the head
cover with two oval head screws and washers.
–
Guide the connecting cable through clamp 4
and screw it on the head cover with oval head
screw and washer.
–
Guide the cable to the cable duct at the back
side of the sewing head and fix it with two cable
ties.
–
Connect plug 6 to the printed circuit board of the
sewing head (see illustration).
–
Stick on reflecting foils 5 (see illustration).
A = for stitch length £ 5 mm
B = for stitch length ³ 5 mm
Ausgabe/Edition:
01. 2006
Anbauanleitung Reflexlichtschranke
Bausatz / Kit 0867 590074
head cover
washer
oval head screw
cable tie
Caution: Risk of injury !
Switch the main switch off!
Mount the kit only with the sewing machine switched off.
6
Printed in Federal Republic of Germany
0667 105164
1001 009243
9204 201657
9840 121001
4
2
1
5
Blatt: 3
Sheett
Teile-Nr./ Part-No.:
0791 867703
3
von 4
from