Data Support DSC HFT1000M Instrukcja obsługi - Strona 11

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Przyrządy pomiarowe Data Support DSC HFT1000M. Data Support DSC HFT1000M 14 stron. Digital moisture analyzer

Drukuj stronę

Data Support Co., Inc * Toll Free 800-726-5883 * Tel: 818-988-7499 * Fax: 818-988-7671 * www.dsctest.com

PSN

RS:2400,7,N,2,X

RS232 Output

^^^^^^^^^^^^^^^^^^^^^^^^

FAT DETERMINATION

DSC HFTx SN #########

Switchoff Mode

Drying Temp

Result Units

00:10

0.0%MC

00:20

0.0%MC

Elapsed Time

Initial Weight

Final Weigh

Final Result

^^^^^^^^^^^^^^^^^^^^^^^^

Compliance

Compliance to the following standards is indicated by the corresponding mark on the product.

Marking

Standard

This product conforms to the EMC directive 2004/108/EC and the Low Voltage Directive 2006/95/EC.

The complete Declaration of Conformity is available from DSC Corporation

AS/NZS4251.1 Emission, AS/NZS4252.1 Immunity

CAN/CSA-C22.2 No. 61010-1-04; UL Std. No. 61010A-1

Interval Print x = Print Interval (1-3600 sec)

Print Serial Number

Print software version

Print Header

Header on or off

Print current RS232 settings

Change RS232 setting (The current RS232 setting can be displayed on the LCD by pressing Print for 2

seconds while in standby mode.)

Baud:1200,2400,4800,9600,19200

Data Bits: 7 or 8

Parity: N = none, O = odd, E = even

Stop Bits: 1 or 2

Handshake: X = xon/xoff (software), R = RTS-CTS (hardware), N = none

The Fat tester will return "ES" for invalid commands.

All communication uses standard ASCII format.

Sent commands must terminate with a Line Feed or Carriage Return Line Feed (CRLF).

Header on

TIMED 10:00

Header on

100C

Header on

%Moisture

Header on

If Print pressed or print interval set.

00:02:21

Printed at successful end of test.

8.560 g

Printed at successful end of test.

8.555 g

Printed at successful end of test.

0.0%MC

Printed at successful end of test.