DURKOPP ADLER H-TYPE Series Dodatkowe instrukcje - Strona 12
Przeglądaj online lub pobierz pdf Dodatkowe instrukcje dla Akcesoria do maszyn do szycia DURKOPP ADLER H-TYPE Series. DURKOPP ADLER H-TYPE Series 18 stron. Instructions for replacing the winder
Drukuj stronę
Fig. 11: Assembling the new tensioning plate
(1) - Holder
(7) - Screw
5. Slip the carrier (8) of the control onto the holder (1) and tighten it using
Fig. 12: Assembling the new tensioning plate
(9) - Control
6. Loosen the 3 plugs of the cables to disconnect them from the control (9).
7. Place the control (9) into the previously assembled carrier (8).
10
①
the screws (7).
Assembling the new tensioning plate
(8) - Carrier
⑨
Additional Instructions H-TYPE - 00.0 - 09/2017
⑧
⑦