DURKOPP ADLER 550-867 Dodatkowe instrukcje - Strona 8

Przeglądaj online lub pobierz pdf Dodatkowe instrukcje dla Skaner DURKOPP ADLER 550-867. DURKOPP ADLER 550-867 20 stron. Btsr sensor

Checking the power

1. Open the control cabinet, the key for which is included with the machine.

2. Check whether LED (1) is lit up.

 If LED (1) is NOT lit up, there is no power.

3. If LED (1) is still lit up, turn off the power,  2 Work preparation, p. 4.

Abb. 5: Checking the power

Replacing the thread tension PCB

WARNING

Risk of injury from electricity

Double-check that the power is turned off.

Disconnect the machine from the power supply.

ATTENTION

Electrostatic charging may cause damage to equipment!

Work on the machine is ONLY permitted while wearing the antistatic

armband.

Handle the PCB only by its edges.

Do not push the PCB over a surface.

Replacing the thread tension PCB

①

(1) - LED

Additional Instructions 550-867 - 01.0 - 08/2017