Cavalry CADA004SA8 Instrukcja instalacji - Strona 9
Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Przechowywanie Cavalry CADA004SA8. Cavalry CADA004SA8 13 stron. Cavalry cada002sa8: install guide
Również dla Cavalry CADA004SA8: Podręcznik użytkownika (20 strony)
Drukuj stronę5) Now you can connect your CADA-SA8 to the card via the TWO eSATA cables (one
per channel) to both eSATA ports on the PCI Card you installed. On the back of the
CADA-SA8, there are two channels for eSATA—you need to use one cable per
channel. Turn on the CADA-SA8, wait about one minute for the RAID5 controller card
to recognize the drive. You may see a window pop-up that says "New event
detected". If so, click OK to continue. Your RAID5 configuration manager screen
should look similar to this.
If your drive doesn't look like this (perhaps with yellow, red or grey boxes in place of
the green boxes) email customer support: [email protected].
NOTE: for PCI-X users, there would be two columns of blank boxes as well.
If it looks like this, it is set up correctly in a RAID 5 configuration. GO ON TO STEP 6.