4iiii FLiiiight Instrukcja aktualizacji - Strona 6
Przeglądaj online lub pobierz pdf Instrukcja aktualizacji dla Rower treningowy 4iiii FLiiiight. 4iiii FLiiiight 10 stron.
4.0 Magnet Alignment
4.1 Height
Your magnet array should be level with your bike's wheel rim. If
the magnet array is too low it will partially face the tire. If it is
too high it will partially face above the wheel rim.
Too Low
Align for height:
1. Using the 4mm Allen key, loosen both mounting bolts
slightly and raise or lower the resistance unit as needed.
2. Re-tighten the mounting bolts.
3. Recheck the height.
1. With the bike
installed in the trainer
and the trainer off,
slide the resistance
unit over to one side,
until the magnet array
touches the wheel rim.
Check that the
magnets are level with
the rim. Check from
both sides.
Correct Height