4IPNET EAP220 Instrukcja szybkiej instalacji - Strona 7
Przeglądaj online lub pobierz pdf Instrukcja szybkiej instalacji dla Bezprzewodowy punkt dostępowy 4IPNET EAP220. 4IPNET EAP220 18 stron. Enterprise access point
Również dla 4IPNET EAP220: Podręcznik użytkownika (20 strony)
Drukuj stronę
Rear Panel
1
1
Restart/ Reset
2
WES Button (RF B)
3
Console port
4
LAN 1 - 4 ports
5
Uplink Port
6
12V
2 A
Right-Side Panel
On the right side of the panel there is a Kensington slot. Admin can also fill it with a rubber plug.
Copyright © 4IPNET, INC. All rights reserved.
2
3
Figure 2 EAP220 Rear Panel
Press once to restart the system; to reset the system to factory default settings,
hold for more than 5 seconds.
For IT administrators to easily setup WDS links with two RF cards.
To access EAP220 via the console interface.
The ports for connections with LAN side devices.
The port for uplink connection to another gateway or device. PoE (802.3at) is
supported.
Power Socket for the power adaptor.
EAP220 Enterprise Access Point
4
3
Quick Installation Guide
ENGLISH
5
6