4IPNET EAP700 Instrukcja szybkiej instalacji - Strona 20

Przeglądaj online lub pobierz pdf Instrukcja szybkiej instalacji dla Bezprzewodowy punkt dostępowy 4IPNET EAP700. 4IPNET EAP700 20 stron.

Step 5 (CONT). Check WDS Link Status

Click on the Status button.

Select the Repeater tab.

Check the signal strength of WDS Link(s)：

Upon the completion of Step 5, there shall be RSSI displayed on the WDS Link Status.

If the RSSI is shown as N/A, check if the wiring is properly connected and please

ensure the accurate execution of Step 5 as described above.

Congratulation!

Now, 4ipnet EAP700 is installed and configured successfully.

• It is strongly recommended to make a backup copy of configuration settings.

• After EAP700's network configuration is completed, please remember to change the IP

Address of your PC Connection Properties back to its original settings in order to

ensure that your PC functions properly in its real network environments.

EAP700 Enterprise Access Point

Quick Installation Guide

ENGLISH

P/N: V11020100928