Datacom Systems VS-1224-F Podręcznik szybkiej instalacji - Strona 15

Przeglądaj online lub pobierz pdf Podręcznik szybkiej instalacji dla Sprzęt sieciowy Datacom Systems VS-1224-F. Datacom Systems VS-1224-F 17 stron. 10/100/1000 mb and 10 gb data access switches

Drukuj stronę

IMPORTANT: For Host Name (or IP address), if initial IP Address

below, use the Local Area Network address setting input during initial

Network IP Address Configuration

direct-connect cross-over cable to PC and custom configured computer IP and Subnet must be set

in order to use the factory default IP Address:192.168.1.1, Subnet Mask 255.255.0.0, Gateway:

192.168.1.0, User name: Administrator, Password: admin

Step 1. Open any freely available terminal emulator (PuTTy or Tera Term for example) on your PC,

select Telnet or SSH type connection, enter the Host Name or IP address and open the connection..

If you are using SSH to connect for the first time, a message something like this will display:

This SSH feature is designed to protect against a network attack known as spoofing: redirecting

your connection to a different computer, so that you send your password to the wrong machine. To

prevent this attack, each SSH Server has a unique identifying code, called a host key. So if you

connect to a SSH Server and it sends you a different host key from the one you were expecting, you

will have the chance to abandon your connection before you type any private information (such as a

password) into it. So the warning message above asks you whether you want to trust this host key

or not.

Whether or not to trust the host key is your choice. If you are connecting within a company network,

you might feel that all the network users are on the same side and spoofing attacks are unlikely, so

you might choose to trust the key without checking it. If you are connecting across a hostile network

(such as the Internet) you should check with your system administrator, perhaps by telephone or in

person.

Step 3. After you have connected, you will be asked to login:, type the username: Administrator

(default value) and press the Enter key. At the Password: prompt, type admin (default value) and

press the Enter key to display the command line > prompt. To see a list of available commands, at

the > command line prompt, type ? and press the Enter key.

Step 4. If additional user operational CLI navigational help or information is necessary, detailed

support, documentation and help can found on the Datacom Systems website

datacomsystems.com.

Step 5. Type Exit and press the Enter key to end the connection session.

'. Otherwise, if initial IP Address

Management Connection

configured, as shown

HAS BEEN

'SERIAL Port (DB9)

HAS NOT BEEN

http://www.

configured, a