DataComm 70-0023 Instrukcja/arkusz instalacyjny

Przeglądaj online lub pobierz pdf Instrukcja/arkusz instalacyjny dla Jednostka sterująca DataComm 70-0023. DataComm 70-0023 2 stron. 4x6 phone module with4 port passive data

Drukuj stronę

DataComm Electronics, Inc.

6349 Peachtree St.

Norcross, GA 30071-1725

888.223.7977

770.662.8205

www.datacommelectronics.com

DataComm Electronics 4x6 Phone Module with

Step 1

 Align the mounting pins with holes in the back of the HCC panel and lock

module into place.

 Pull the Cat 5 or higher rated cables into the HCC panel from one of the

side knockouts.

 Install Cat 5 or higher rated cables from each location in the house to the

8-port passive data module. Match the color-coding of the wires to the

colors on the 110 IDC connectors.

 The wires should be punched down, using an industry standard punch-

down tool, to the 110 IDC connectors following the T568A wiring

configuration as shown below.

Step 2 Telephone

 Pull the telephone wires into the HCC panel from one of the side

knockouts.

 Install the cable from the telephone company demarcation point to the

110 IDC marked from Telco.

 Install the twisted pair cables from each location in the house to the

remaining 110 IDC connectors. Match the color-coding of the wires to the

colors on the 110 IDC connectors.

 The wires should be punched down, using an industry standard punch-

down tool, to the 110 IDC connectors following the T568A wiring

configuration as shown below.

 Line 1 is Blue, Line 2 is Orange, Line 3 is Green and Line 4 is Brown.

 A RJ31X port is provided for line 1 seizure by security system.

INSTRUCTIONS ARE CONTINUED ON THE BACK SIDE OF THIS PAGE

Instruction / Installation Sheet

4 Port Passive Data 70-0023

White / Blue

Blue

White / Orange

Orange

White / Green

Green

White / Brown

Brown

3/13/08