4IPNET OWL300 Instrukcja szybkiej instalacji - Strona 11

Przeglądaj online lub pobierz pdf Instrukcja szybkiej instalacji dla Bezprzewodowy punkt dostępowy 4IPNET OWL300. 4IPNET OWL300 19 stron. Outdoor access point

Drukuj stronę

4IPNET OWL300 Instrukcja szybkiej instalacji

Getting Started

4ipnet OWL300 supports web-based configuration. When hardware installation is complete, OWL300 can be

configured through a PC by using a web browser such as Mozilla Firefox 2.0 or Internet Explorer version 6.0

and above.

The default values of LAN IP address and subnet mask of OWL300 are:

IP Address: 192.168.1.1

Subnet Mask: 255.255.255.0

Steps:

1. To access the Web Management Interface, connect the administrator PC to the Uplink port of OWL300

via an Ethernet cable. Then, set a static IP address on the same subnet mask as OWL300 in TCP/IP of

your PC, such as the following example:

IP Address: 192.168.1.100

Subnet Mask: 255.255.255.0

2. Launch the web browser on your PC by entering the IP address of OWL300 (http://192.168.1.1) in the

address field, and then press Enter.

Example of entering OWL300's default IP Address via a web browser

3. The following Admin Login Page will appear. Enter "admin" for both the Username and Password fields,