dataflex Viewlite link Podręcznik użytkownika - Strona 7
Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Stacja dokująca dataflex Viewlite link. dataflex Viewlite link 11 stron.
Drukuj stronęNumber of external
Mode
display devices
SuperSpeed
1
Dual 4K
1
SuperSpeed
2
Dual 4K
2
To check the screen resolution of your display device and adapt it via
your device's operating system (see:
4.9 Configuring your display
device).
Take note: Check the specifications of your display devices and your
device. These specifications may not exceed the maximum screen reso-
lution and USB/Ethernet speeds.
Take note: If you have two 4K display devices, set Link to the dual 4K
mode and not the SuperSpeed mode. In SuperSpeed mode, the restric-
tions in your device's operating system will prevent it from functioning.
This can be remedied by disconnecting the device, switching to dual 4K
mode and reconnecting the device to Link.
Max. resolu-
Max. refresh
Max. USB
tion
rate
speed
1920 x 1200
60 Hz
2048 x 1536
60 Hz
5 Gbit/s
4096 x 2160
30 Hz
1920 x 1200
60 Hz
2048 x 1536
60 Hz
480 Mbit/s
4096 x 2160
60 Hz
1920 x 1200
60 Hz
5 Gbit/s
2048 x 1536
30 Hz
1920 x 1200
60 Hz
2048 x 1536
60 Hz
480 Mbit/s
4096 x 2160
30 Hz
4.2 Connecting a display device
Max. Ether-
net speed
You can connect one or two display devices to Link via the two HDMI
ports (see table 2.2) on the back of Link.
Take note: If your display device does not have an HDMI connection, you
1 Gbit/s
can easily convert your VGA, DVI or display port connection to HDMI.
See section
4.1 Selecting the desired mode
100 Mbit/s
4.3 Connecting to a network
You can connect Link to a network or the Internet via the RJ-45 Gigabit
1 Gbit/s
Ethernet port (See table 2.2) on the back of Link.
Take note: Use a CAT5 or newer Ethernet cable with RJ45 connection to
take advantage of all the possibilities offered by Link.
100 Mbit/s
4.4 Connecting USB 2.0 peripheral equipment
You can connect peripheral equipment to Link via the two USB 2.0
ports (see table 2.2) on the back of Link. The USB 2.0 ports support
HighSpeed rates and a power output of 2.5 watts.
Take note: Make sure the peripheral equipment is compatible with the
performance specifications of Link.
for screen resolution options.