Elsema G4000 Podręcznik - Strona 3

Przeglądaj online lub pobierz pdf Podręcznik dla Odbiornik Elsema G4000. Elsema G4000 11 stron. 4g receiver with relay output for opening sliding, swing gates, doors or switching devices

Drukuj stronę

Important Instructions

 Before attempting to set up the G4000, ensure that you have thoroughly read and understood

the provided instructions.

 The G4000 receiver can be setup in 2 ways. A. using Bluetooth or B. using SMS

apply)

 Ensure that Caller ID is enabled on the phones of all

identify the caller.

 Following the initial setup, only users listed as authorised will be able to make any modiﬁ cations.

 There can be up to 10 adminstrators. Password recovery will be exclusively sent to the 1

tor. It is crucial to ensure that the correct phone number has been designated as the 1

 In the absence of an administrator, the unit must be returned to Elsema for password recovery

(Charges will apply).

 Performing a factory reset will erase all data, including the list of authorised users.

 When utilizing Bluetooth setup, the user must be in close proximity to the G4000 receiver, ensuring

that Bluetooth functionality is activated.

Before setup

The Elsema App is solely required for the initial setup process. Once the G4000 is conﬁ gured, you can

operate it without the App by simply calling the G4000's phone number.

1. Download the Elsema App from your device's app store. Simply search for "Elsema" to download and

install the App.

2. Ensure that the SIM is activated. Connect the SIM into a phone and it should be able to call out and

receive calls and SMS messages.

3. Get in touch with your service provider and get them to turn OFF the voicemail service.

4. Carefully remove the cover of the 4G receiver and insert the SIM card into the designated SIM holder.

(Refrain from inserting or changing the SIM card while power is connected or any LED indicators are

lit).

5. Connect the power supply to 4G receiver.

6. Once the LED turns green from white ﬂ ashing, it has successfully registered to the network.

7. The device is now ready for setup.

authorised

users, allowing the 4G receiver to

(SMS charges will

administra-

administrator.