Cayin iHA-6 Podręcznik użytkownika - Strona 9
Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Wzmacniacz Cayin iHA-6. Cayin iHA-6 11 stron.
Drukuj stronę
conducted by authorized service technician.
8.
Please disconnect power cable before you attempt to clean the machine.
Please use soft clean cloth to wipe clean the chassis, do not use volatile solution
or corrosive cleaning product.
9.
Place the amplifier at a flat surface, make sure all four supporting tips are evenly
loaded.
10. Do not place any flammable material on the amplifier
11. Do not operate the amplifier under direct sunlight or high temperature, will cause
serious deviation or even damage to the electronic components.
12. The machine will become hot during operation, Please keep the amplifier at a
well-ventilated environment and do not cover the amplifier with anything.
13. Please Contact your Cayin agent or retail shop, or our after-sales service if the
machine is not working properly.
Trouble Shooting
To ensure the amplifier will function at premium condition, please follow the basic
operation and safety precaution as advice. Improper operation might lead to
malfunction, if you run into trouble as stated below, please check before you panic.
Sometime the problem are related to associated equipment or cables, please also
check and make sure everything is in proper condition. Please contact your Cayin
agent or retail shop, or our after-sales service if the problem cannot be rectified.
Problem
No sound
Power
from
Indicator is
headphone
OFF
after power
on
Power
Indicator is
ON
Cause
Power is not
connected
Main fuse is out
No signal input
Audio cable has not
connected properly
Headphone has not
connected properly
Volume at lowest
position
Remedy
Make sure power cable is
properly connected to a power
outlet and there is proper
power supply from the outlet.
Replace fuse with same
specification with the original.
Make sure you have selected
the correct source from the
front panel
Check if the source equipment
is functioned properly.
Connect audio cable properly
Connect headphone properly
Turn up the volume control to
appropriate level