Cayin M-11LS Podręcznik użytkownika - Strona 13
Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Wzmacniacz Cayin M-11LS. Cayin M-11LS 14 stron. Vacuum tube preamplifier
Drukuj stronę
Turning On
Before turning on the amplifier please make sure all connections are right and power supply is stable.
•
Turn on the amplifier, the power indicator will be on and
the working indicator will keep flickering.
•
The working indicator will be on after 30 seconds. It
means that the amplifier is working normally. If the
working indicator is off, please turn off the power and
contact with our local agent or our company.
•
Select the right audio source channel, adjust the volume
to a certain position and then you can enjoy themusic
you prefer.
：
NOTE
◆
Turn on: CD player- decoder- pre-amplifier-
power amplifier
◆
Turn off: power amplifier- pre-amplifier-
decoder- CD player
S m a l l Ti p s
——
Read the Manual
——
Keep the Manual
——
Warning Signs
Don't tear off or rub off the serial number.
——
Operation
Do the operations as you are instructed in the Manual.
——
Parts
If you are going to use parts not supplied by our company like power cord, fuses etc please
make sure that parts you used are compatible with the safety requirements. Or it will cause fire or electric
shock.
——
Placement
Put the amplifier on a level place. Make sure that it doesn't bring damage to the children,
adults and the amplifier itself.
——
Power
Please make sure the local voltage is the same level as indicated on the rear panel.
——
Overload
If the power socket is overloaded with other equipment, it will cause fire or electric shock.
——
Warranty Service
the cover may expose you to dangerous voltage or other hazards. The warranty doesn't extend to any
product that has been opened by you without permission of our company.
——
Troubleshooting
Please read the user's manual carefully before installation and operation.
Please keep the manual for future reference.
Do not open the product and change the components inside yourself. Opening
If any problems when you are using the product, please check according to
NOTE:
1. When the audio system is under working state, don't
unplug the signal cable or speaker cables, or it will
cause damage to the amplifier and other equipments.
2. It should at least takes 2 minutes before you turn on the
power again, or it will cause damage to the vacuum
tubes.
12