Datalink Systems QBASE 915MHz Podręcznik użytkownika - Strona 8

Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Modem Datalink Systems QBASE 915MHz. Datalink Systems QBASE 915MHz 17 stron.

Drukuj stronę
forward overlap. The wind speed and the wind direction is not considered at this point. For the exact trigger
speed including the wind conditions see step 51.
If the selected camera can not manage the required trigger speed the trigger speed is displayed in red color.
10.
Either select
Pan to ...
11.
Open
Area Planning
by selecting
12.
Select
Create a new area
corner it must be selected.
Undo
Redo
Delete selected vertex (orange circle)
13.
14.
If you wish to edit the
15.
If you wish to
delete
16.
Select
Mission Info
Note:
by a green colored triangle
17.
Adjust the
18.
Set the
direction of the the legs.
amount of legs. Set the direction to Manual if it is useful to change the legs depen-
ding on the wind direction.
19.
Set the
distance between the legs.
Percent: distance based on side overlap in percent
Manual: distance between the legs
Gap: set the gap between the legs
20. Legs can be extended
legs at the entry are extended by 10 meters.
21.
Check Flip Legs to
change the waypoint order
22.
Check Invert Legs to
change the entry and exit
23.
Check Optimize Leg Sequence
the Trinity and the current leg distance.
24.
Select
Generate Flight Plan.
Note: If changes in Area Planning or Mission Template are made afterwards, the
The number of waypoints is limited to 200. If the amount is exceeded, the button is disabled.
25.
The
Flight Planning
menu
26.
Waypoints can be
edited, added and deleted
View Settings
Area:
Shows the area including the numbered legs.
Highlighted path: Highlights the simulated path between the previous, the current and the next waypoint.
Trigger positions: Displays the trigger positions (yellow dots).
Waypoints:
Shows the waypoints.
?
in the left section and search for the
in the header section.
Cancel
select
.
select
.
.
to display the size of the planned area.
.
Set the direction to Auto to obtain the minimum
on a leg.
to optimize the leg order
Generate Flight Plan again.
in the header section.
desired location
or zoom to the desired location.
based on turn radius of
7 QBase – ground control station
Mission Template before.
Trinity user manual | 17