Cayin CS-100DAC Podręcznik użytkownika - Strona 13

Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Konwerter mediów Cayin CS-100DAC. Cayin CS-100DAC 17 stron. Hifi audio d/a converter

8. Output Mode

Selection with buttons on the Front

 At the Main Screen, press "MENU/OK" button to enter the Main Menu.

 Press the Triangle to Select "OUTPUT MODE", press MENU/OK button to enter the

"OUTPUT MODE" selection menu,

between "LINE OUT" and "PRE OUT". Select the output mode pressing MENU/OK

button.

 Display will return to the main screen after 3 seconds, the output mode will be shown

on the top-right corner of the display.

Selection with Remote

Using the LINE/PRE Key on the remote can switch between LINE OUT and PRE OUT

output modes.

Please make sure local voltage level is matched with the input level of the amplifier,

which indicates on the rear panel.

Unplug the power cord if you are not going to use the DAC for an extended period of

time, and keep the machine in proper condition.

Please handle with care, avoid tempering to the machine.

The DAC will not function appropriately if moistures has developed inside the DAC,

please avoid operate the machine until internal moistures has cleared. Moistures can be

caused by:

 Placing the DAC at a location when heater or steamer has just turned on

 Moving the machine from a cold environment to a warm location

 Moving the machine from a chilled (e.g., air conditioned room) to a hot and

humidity environment.

Do not attempt to service this product yourself. Opening the cover may expose you to

electric shock or other hazards.

The DAC must be keep away from water dripping or water splitting, do not place any

objects filled with liquids such as vases or some others on the top or around.

Do not attempt to disassembly the machine, all service and maintenance must be

conducted by authorized service technician.

Please disconnect power cable before you attempt to clean the machine. Please use

soft clean cloth to wipe clean the chassis, do not use volatile solution or corrosive

Press the Triangle buttons

repeatedly to select