4IPNET APM100 Podręcznik użytkownika - Strona 3

Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Kontroler 4IPNET APM100. 4IPNET APM100 20 stron. Access point

Drukuj stronę

1 4ipnet APM100 Quick Deployment

1.1 Check your Network

Environment

The 4ipnet APM1000 has a browser-based

interface for easy configuration and

management. To access the interface, perform

the following steps:

Setup your computer's IP address within

192.168.1.1/24, except 192.168.1.10

Connect your computer to the APM100

with an Ethernet cable

Open a browser and type 192.168.1.10 as

the URL

Use

the

username/password: admin/admin to sign

Change the administrator's password from

the default to a new password

default

administrator

APM100 Access Point Controller

Before you start to add the 4ipnet access points

into AP Management, we would clarify the

network topology of your router and 4ipnet

access points. Based on your topology, this

chapter will provide the simplest way to deploy

Start the Setup Wizard When Deployed in



the Same Subnet

Add an Access Point When Deployed



Across Different Subnets

1.2 Start the Setup Wizard

When Deployed in the

Same Subnet

When entering the system interface for the first

time, the setup wizard will automatically be

executed and displayed on the interface. All you

need to do is follow the process to complete the

configuration. After you finish the wizard and

reboot

the

system,

computer's network setting and, type the

newly-configured system IP address in the

browser to enter the User Interface (UI) again.

Furthermore, the auto-provisioning feature is

automatically

enabled

"Managed IP Pool Start" and "Managed IP Pool

End" and completing the setup wizard. The

discovered 4ipnet APs with default settings will

be automatically added into the AP List and

applied with the template settings configured in

the wizard.

User Manual ENGLISH

simply

change

your

after

entering

the