Dust Right 650 CFM Instrukcja obsługi - Strona 5
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Odpylacz Dust Right 650 CFM. Dust Right 650 CFM 8 stron. Wall-mount dust collector
Również dla Dust Right 650 CFM: Instrukcja obsługi (8 strony)
9
2
7
13
9
5
4
1
9
3
9
PARTS LIST
8
1
Base
2
Motor Assembly
3
Motor Bracket
4
Bag
5
Bag Clamp
7
Handle
8
1/4"-20 x 1" L Flathead Screw
9
1/4"-20 x 1/2" L Flanged Hex Head Screw
10 Z-Bracket
11 #10 x 1
12 Wrench (Not Shown)
13 Foam Tape (Roll)
Assembly
1. Attach the Handle (7) to the blower with the two included
1/4"-20 x 1" long Flathead Screws (8).
2. Use four of the included 1/4"-20 x 1/2" long Flanged Hex
Head Screws (9) and the included Wrench (12) to attach
the motor to the black Motor Bracket (3).
3. Use four of the included 1/4"-20 x 1/2" long Flanged Hex
Head Screws (9) and the included Wrench (12) to attach
the black Motor Bracket (3) to the larger black Base (1).
after the Dust Collector has been mounted to the wall.
If installing the optional Canister Filter (53522, sold
separately), skip these steps and follow those instructions.
4. Fit the narrow mouth of the Bag (4) through the Bag
Clamp (5) and over the outlet port. Tighten the Bag Clamp
around the outlet port. Make sure that the clear window in
the Bag will be visible so you will be able to see when the
Bag needs emptying, and close the zipper at the bottom.
5. Connect a 4" dust hose (not included) to the Dust Collector's
inlet port, securing it with a hose clamp (not included).
11
⁄
" Wood Screws
1
2
Steps 4 and 5 might be easier to complete
10
Quantity
1
1
1
1
1
1
2
8
1
3
1
1
5