elsner elektronik 70144 Specyfikacje techniczne i instrukcje instalacji - Strona 2

Przeglądaj online lub pobierz pdf Specyfikacje techniczne i instrukcje instalacji dla Zasilanie elsner elektronik 70144. elsner elektronik 70144 2 stron. Systems

Drukuj stronę
2.3. Power Supply
2.3.1. Housing example with central operating unit
Fig. 4
3.
Settings of the device
3.1. Starting Position
elsner elektronik
KNX Power Supply
Normal Operation
Diagnostics >
The following may be read off and set on the display of the power supply system
KNX PS640+:
•
Reset of a line
•
Recall of the data memory with operating hours, overcharge, external
electrical surge, internal electrical surge, short circuit and excess temperature
•
Recall of the operating data bus voltage, bus current and temperature
•
Language of display
The display is dimmed after 60 seconds if during this period no key is pressed.
3.2. Key functions in display menu
Confirms the selection, moves to the next
step.
One step back.
Changes a setting (selects a setting or changes
a value). The cursor (the blinking rectangle)
indicates the selected menu item.
ok
Confirms the settings and returns to the device
main menu.
3.3. Line reset
In starting position, press key
elsner elektronik
KNX Power Supply
Normal Operation
Diagnostics >
Press key
Line Reset
> ™
Data Memory
>
the sector
Operating Data >
Language
>
Move the cursor (flashing rectangle at
Reset: Yes
™
right edge) to the desired setting with the
No
30 seconds
keys
Reset not active!
Yes
Reset is activated. The line is switched to neutral and
shorted. The basic setting displays: „Reset is active!"
No
Reset not activated. The power supply system works in
normal operation.
30 seconds
A reset of 30 seconds is started. Afterwards, the line is
supplied with voltage as usual. During the reset state,
which lasts 30 seconds, the basic setting displays:
„Reset active: XX sec" (countdown).
With key
, you return to the previous menu level.
3.4. Data memory
In starting position, press key
elsner elektronik
KNX Power Supply
Normal Operation
Diagnostics >
Move the cursor (flashing rectangle at
Line Reset
>
right edge) to the
Data Memory
> ™
Operating Data >
with the keys
Language
>
key
Hours ofOperation > ™
Short circuit
Overload
>
Excess Temperat.
Ext. Overvoltage
>
Int. Overvoltage
>
Move the cursor to the desired menu with the up and down keys and press key
Power Supply Systems KNX PS640+ and KNX PS640+USB • Version: 19.08.2020 • Technical changes and errors excepted. • Elsner Elektronik GmbH • Sohlengrund 16 • 75395 Ostelsheim • Germany • www.elsner-elektronik.de • Technical Service: +49 (0) 7033 / 30945-250
Power Supply Systems KNX PS640+ and KNX PS640+USB
once.
once more in order to get into
Line reset
.
„
"
and confirm with key ok.
or
once.
Data memory
menu
„
"
and
and confirm with
.
>
>
3.4.1. Operating hours
Run time: 0 years
0 day 0 hrs.
< = Back
3.4.2. Overload
Run time: 0 years
0 day 0 hrs.
< = Back
3.4.3. External Overvoltage
External Overvoltage
was detected
0 times.
< = Back
3.4.4. Internal Overvoltage
Internal Overvoltage
was detected
0 times.
< = Back
3.4.5. Short Circuit
A short at the bus was
detected
0 times.
< = Back
3.4.6. Excess Temperature
Excess Temperature on
the board
was detected
0 times!
3.5. Operating data
elsner elektronik
KNX Power Supply
Normal Operation
Diagnostics >
Line Reset
>
Data Memory
>
Operating Data > ™
Language
>
Bus Voltage
29.4 V
Bus Current
320 mA
Temperature
42.1°C
The current values of
•
Bus voltage
•
Bus current
•
Temperature on the circuit board of the device
are displayed.
With key
you return to the previous menu level.
3.6. Language
elsner elektronik
KNX Power Supply
Normal Operation
Diagnostics >
Line Reset
>
Data Memory
>
Operating Data >
Language
> ™
Sprache
:Deutsch ™
Language :English
Idioma
:Espanol
Taal
:Hollands
With key
you get back by one menu level to the basic setting.
4.
Disposal
After use, the device must be disposed of or recycled in accordance with the legal
regulations. Do not dispose of it with the household waste!
.
The operating hours of the power supply
system are displayed in years, days and
hours.
With key
you return to the previous
menu level.
The number of overload incidents and the
total time in days, hours and minutes are
displayed.
With key
you return to the previous
menu level.
The number of external overvoltage inci-
dents is displayed.
With key
you return to the previous
menu level.
The number of internal overvoltage inci-
dents is displayed.
With key
you return to the previous
menu level.
The number of short circuit incidents at
the bus is displayed.
With key
you return to the previous
menu level.
The number of excess temperature inci-
dents on the circuit board of the device is
displayed.
With key
you return to the previous
menu level.
In starting position, press key
once.
Move the cursor (flashing rectangle at
right edge) to the „Operating Data" menu
with the keys
and
and confirm with
key
.
In starting position, press key
once.
Move the cursor (flashing rectangle at
right edge) to the „Language" menu with
the keys
and
and confirm with the
key
.
Move the cursor to the desired language
with the up and down keys and press the
key ok. The display automatically jumps
to the previous menu in the desired lan-
guage.
2