CB2 Dwight 5-Shelf Bookcase Instrukcja montażu - Strona 2

Przeglądaj online lub pobierz pdf Instrukcja montażu dla Wyposażenie wnętrz CB2 Dwight 5-Shelf Bookcase. CB2 Dwight 5-Shelf Bookcase 3 stron.

Drukuj stronę
dwight
5-SHELF BOOKCASE
NOTE: Make sure pilot
holes in crossbars are
positioned towards the
bottom during assembly
top
crossbar
frame
A
B
A
left side frame
A. Place left side frame on a clean, padded
surface. Attach top frame to left side frame with
2 bolts as shown, using an allen wrench. Do not
fully tighten the bolts until further instructions.
B. Fit 4 crossbars onto corresponding brackets
1
of left side frame. Secure each crossbar with 2
bolts as shown. Do not fully tighten the bolts.
BACK VIEW OF
ASSEMBLY
NOTE: Do not
over tighten bolts
A
cross brace
A. With assistance of another adult, carefully
position bookcase upright. Attach cross brace
to back of bookcase with 4 bolts as shown.
B. At this point, secure all bolts with an allen
3
wrench. Do not over tighten the bolts.
Made in Taiwan - r06
NOTE:
Do not
fully tighten
B
bolts
B
Customer Service 800.606.6252 | Latest instructions available at www.cb2.com
right side frame
A
B
A
left side frame
A. Attach top frame to right side frame with 2
bolts as shown. Do not fully tighten the bolts.
B. Fit 4 crossbars onto corresponding brackets
of right side frame. Secure each crossbar with 2
bolts as shown. Do not fully tighten the bolts.
2
C. Insert 2 levelers to bottom of each side frame
as shown. Turn levelers clockwise to secure.
B
A. Adhere 4 glass bumpers per shelf as shown.
B. Carefully place glass shelf (labeled TOP)
onto top of bookcase and smallest to largest
glass shelves onto remaining shelves as shown.
Adjust levelers as necessary.
4
Assembly is now complete.
B
C
NOTE: Do
not fully
tighten bolts
TOP glass shelf
glass bumper
A
smallest
glass shelf
NOTE: Make sure each
shelf is securely supported
by each glass bumper
largest
glass shelf
Page 2 of 3
A
o
b
B
a