CB2 Platform Coffee Table Instrukcja montażu - Strona 4
Przeglądaj online lub pobierz pdf Instrukcja montażu dla Wyposażenie wnętrz CB2 Platform Coffee Table. CB2 Platform Coffee Table 4 stron.
Drukuj stronę
platform
Slide drawer bottom into corresponding
9
grooves of drawer assembly.
Fit dowels of drawer assembly into
corresponding holes of drawer right and attach
with 4 screws as shown. Repeat steps 8-11 for
11
remaining drawer assembly.
cleaning & care
Clean surfaces with a dry or damp soft cloth. Do not use abrasive cleaners. Do not use furniture wax or polish as
the unit is finished with a protective clear lacquer. It is recommended to use coasters to protect surface from heat
and water.
Made in Vietnam - r04
COFFEE TABLE
drawer bottom
drawer right
Customer Service 800.606.6252 | Latest instructions available on www.cb2.com
Fit dowels of drawer back into corresponding
holes of drawer assembly and attach with 2
10
screws as shown.
NOTE: To remove drawers, fully extend the
drawer and push the lever on the right
drawer glide down and pull the lever
on the left drawer glide up while
pulling out the drawer.
Fit glides of drawer assembly into drawer glides
of unit. Push drawer assembly into the glides
until the drawer is all the way in. Test the drawer
by opening and closing a couple of times to
ensure it is secure.
12
Assembly is now complete.
drawer back
left drawer
glide
right drawer
glide
Page 4 of 4