Dustless 16 Series Instrukcja obsługi - Strona 6

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Odkurzacz Dustless 16 Series. Dustless 16 Series 8 stron.

vacuum and disconnect from outlet.

Note: When barrel is full the automatic

shut-off mechanism will shut off vacuum

pickup. When this happens, the motor will

become noticeably higher pitch.

4. Empty barrel by unscrewing drain cap.

Drain is regulated so liquid can go from

a drip to a full flow. Note: Hose can be

put in the drain cap to drain up to 12 feet

away.

CLEAN FILTERS

(REGULAR WET+DRY)

1. Always turn off the vacuum before cleaning

the filters.

2. Keep the lid closed on the barrel, do not

remove the lid.

3. Remove the black agitator rod cover from the

lid.

4. Lift the agitator rod slightly and rapidly

shake it from side to side five times so the

basket hits the sides of the outer filter to

knock off the layer of dust. Note: Pushing

down may push the filter off.

5. Replace the black agitator rod cover to

the top of the lid.

CHANGING WUNDERBAGS

1. Disconnect the vacuum from outlet.

2. Remove intermediate.

3. Seal and remove full WunderBag. Note: To

avoid back strain, do not lift a full bag.

4. Install new WunderBag. (Refer to WunderBag

Installation)

STORAGE

1. Disconnect from outlet

2. Empty barrel.

3. Rinse barrel thoroughly and wipe out.

4. Store hose and attachments.

When using the appliance at a distance

where an extension cord becomes necessary,

a 3-conductor grounding cord of adequate

size must be used for safety, and to prevent

loss of power and overheating. Use the table

that follows to determine A.W.G. wire size

Customer Service Helpline 1.800.568.3949 dustlesstools.com