Datalogic Lynx D Skrócona instrukcja obsługi

Przeglądaj online lub pobierz pdf Skrócona instrukcja obsługi dla Stacja dokująca Datalogic Lynx D. Datalogic Lynx D 2 stron. Single slot dock
Również dla Datalogic Lynx D: Podręcznik użytkownika (2 strony), Skrócona instrukcja obsługi (2 strony)

Drukuj stronę

Lynx

Single Slot Dock

Quick Start Guide

Read this manual carefully before performing any type of

connection from the terminal to a host PC using the Single

Slot Dock.

The user is responsible for any damages caused by

NOTE

incorrect use of the equipment or by inobservance of the

indication supplied in this manual.

Do not attempt to disassemble the Single Slot Dock, as it

does not contain parts that can be repaired by the user.

Any tampering will invalidate the warranty.

NOTE

The Single Slot Dock paired with a Lynx PDA builds a reading system

for the collection, decoding and transmission of barcoded data.

The Single Slot Dock is both a USB and a serial communication

adapter between the terminal and the host computer.

The Single Slot Dock also functions as a battery charger, both for the

terminal and the spare battery pack (standard 94ACC0064 and high

capacity 94ACC0065). The spare battery can be charged by inserting it

into the slot at the back of the cradle.

Power supply is required for the Lynx to be connected to the cradle

and for battery recharging operations.

General View

Contacts for Lynx

Spare Battery Slot

Power On

Battery Charge

LED

Status LED

RS232 Connector

USB Connector

822001283

(Rev. A)

Jan. 2018

PDA Insertion/Removal

For correct insertion into the dock, insert the PDA from the top of the

dock and push it down.

To remove the PDA from the dock, simply pull it upwards while

holding the dock firmly down.

Power Supply

Each dock requires a power supply.

LED Indicators

LED

Power ON LED

Solid green

Dock is powered.

Battery Charge Status LED

Off

Battery absent.

Solid red

Battery charge in progress.

Power

Jack

Solid green

Charge completed.

Blinking red

Error.

Using the Spare Battery Charger

Insert the battery pack, contacts side first, into the slot and press it

until the battery latch is automatically closed; charging starts

automatically.

To remove the battery, press the battery-release lever.

Fastening the Dock to a Surface

To securely fasten the Single Slot Dock to tables, desks and other

surfaces, and to prevent the dock from moving when you remove the

device, use the four velcro dual lock feet provided with the matching

dual-lock adhesive pads.

Status

Remove the protective feet from the dock before attaching the velcro

dual lock feet.

Datalogic and the Datalogic logo are registered trademarks of Datalogic S.p.A. in

many countries, including the U.S.A. and the E.U. Lynx is a trademark of

Datalogic S.p.A. and/or its affiliates, registered in many countries, including the

U.S. and the E.U. All other trademarks and brands are property of their

respective owners.