Datalux LMV-XG12 Instrukcja obsługi - Strona 5

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Monitor Datalux LMV-XG12. Datalux LMV-XG12 11 stron. 12.1â€ monitor product

Datalux LMV-XG12 & LMV-XG12i - Operation Manual

Datalux recommends your test of the unit be done promptly since the warranty period begins upon

shipment from Datalux. In the event that you encounter problems or if the unit was damaged in shipment

or you have been sent the wrong configuration, please refer to the Service and Support manual that was

sent with this unit.

Connect your monitor to a power supply

Each 12.1" monitor product is supplied with a wiring harness for the connecting the LMV-XG12/LMV-

XG12i to your own power supply. This is a fused two-wire lead with .25" quick disconnects. (Ref.

Datalux P/N 333-352).

The Datalux LMV-XG12/LMV-XG12i requires a regulated 8-18 volt input supply. If using an AC supply,

it is recommended that you use only a Datalux power supply. This power supply connects to the LMV-

XG12/LMV-XG12i through a power jack locat ed through the pigtail at the end of the 333-370 USB +

power cabl e (or 333-373, in the case of a serial cable version).

There is an optional AC/DC power supply. This supply is capable of delivering 12 volts @4.17 amps.

(Ref. Datalux P/N UNI-POWER-12V1).

In either case, the barrel plug is inserted into the mating jack connector and the locking ring is screwed

down securely.

When power is applied, the Power LED on the membrane switch illuminates.

- Press the power switch to activate the monitor.

Front panel membrane switch

Power Switch

Page 5