Datamars R-UHF-SR120 Skrócona instrukcja obsługi

Przeglądaj online lub pobierz pdf Skrócona instrukcja obsługi dla Czytnik kart Datamars R-UHF-SR120. Datamars R-UHF-SR120 2 stron.

Click on the LiveRead button on the right side of the page and then click on the Start

button. The EPC (Electronic Product Code) of the RFID tag on the antenna is shown

on the LiveRead window. You successfully read the tag!

Cloudburst allows to set-up all the parameters included the network interface of the reader

to connect it to the laundry network and start getting EPCs in the laundry management

software.

For additional information see the Cloudburst online help or the user manual at the

following link: https://www.textile-id.com/cloudburst.

Support

Contact Datamars Textile ID support team at

landline support at +41 91 935 73 80.

UM001331

or call the

v.2.0 - January 2019

Quick Start Guide

for Speedway R-UHF-SR420 / SR220 / SR120

This guide explains how to start integrating the UHF RFID reader in your laundry.

Reader connectors and indicators

Refer to the following pictures to identify reader's connectors and LED indicators.

Connect the reader through Ethernet interface

The RFID reader has DHCP client enabled by default. It can be connected to the laundry

network or directly to your PC for first setup. Follow the next steps if you want to

connect it to your PC directly.

Make sure your Local Area Connection adapter is set to obtain an IP address

automatically.