Datamax I-4306 Skrócona instrukcja obsługi - Strona 2
Przeglądaj online lub pobierz pdf Skrócona instrukcja obsługi dla Drukarka Datamax I-4306. Datamax I-4306 2 stron. I class series
Drukuj stronęÌ
Loading Media
Ready Mode:
Í
Printer
Controls
With the Printer On, and loaded with media (at least 4 inches wide):
Î
Ø Verify the printer is in the 'Ready Mode'
Ø Press the
Printing a Test
Ø Using the
Label
button again, after a brief hesitation the printer will print one
Configuration Label.
Ø Rotate the Printhead
Latch and raise the
printhead
Ø Slide the Roll Media
onto the Media Hub
Ø
Route the Media as
è
shown
Menu Mode:
ŒPause: Toggles the pause condition.
ŒArrow Up:
•Feed: The FEED button feeds a
label, and clears any faults
that have been corrected.
•Arrow Down:Moves to the previous item in
ŽCancel: Cancels a job and pauses the
printer.
ŽEnter:
•Menu: Toggles between the ready
and menu mode.
•ESC:
•Test:
Enables the quick test mode,
see the Operators Manual
for additional information.
è
button.
button scroll to 'Print Config Label'. Press the
Internal Media Loading
Moves to the next item in the
menu tree, (increase values).
the menu mode, (decrease
values).
Selects a displayed item or
value.
Moves to the previous menu
level.
'
Refer to the Operator's Manual for the Printhead Cam Adjustment when
using narrow media.
Be sure to follow and perform the suggested Cleaning Schedule listed in
the Operator's Manual.
Contacting Datamax...
Additional
Corporate Headquarters
Information
Technical Support
External Media Loading
ŒReady:
•Stop: On indicates paused state.
ŽError: On indicates a fault. To clear a fault
(407) 578-8007
(407) 523-5540
For the latest products, news, and support visit our web page at
www.datamaxcorp.com
On indicates ready,
blinking indicates menu mode.
press the feed button.