CBT Supply FIK-23 Instrukcja instalacji - Strona 2

Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Wyposażenie wnętrz CBT Supply FIK-23. CBT Supply FIK-23 16 stron. Flipit kit generation ii

Drukuj stronę

Getting Started

WARNING

Tools Needed for

Full Installation

Tools needed for

pre-assembly:

• Power Drill

• Tape Measure

• Commercial-grade Jigsaw

• Phillips bit dr iver

• 3/8" Drill Bit

• 1/8" Drill Bit

• Pencil

• Permanent Marker

• Masking Tape

• Glue stick

Tools needed for installation

into factory cut desktop only:

• Screw gun or #2 Phillips

screw driver

• 3/8" open end wrench

These installation instructions guide you through the proper way of completing the

assembly of the flipIT

Kit FIK-18 (with keyboard) and FIH-18 (without keyboard,

plus cable release actuator handle). Improper installation may void the warranty. It is

especially important that the installer obser ve proper care in protecting surf aces from

abrasion.

For any questions or assistance, please contact Technical Service at 800-770-7042

ext 810.

POWER TOOLS ARE DANGEROUS.

Review the safety procedures supplied by your power tools' manufacturers. Heed all

warnings for your safety's sake. Always use safety glasses and wear proper

apparel that won't get caught in moving parts. CBT Supply, Inc. will not be held liable

for misuse of tools and disregard f or power tool manufacturer's safety precautions.

STOP!

The installer must possess the

skill to cut within the toler ance

of the template layout line if no

factory-made cutout is made in

the table top. Do not attempt

this installation without this

level of craftsmanship skill.

If a factory made cut is provid-

ed, only skills of using a scre w-

driver and wrench are required.