DUUN SA1100 Instrukcja obsługi - Strona 8

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Sprzęt rolniczy DUUN SA1100. DUUN SA1100 11 stron.

Preparation for use

Quantity regulation

The sand spreader is delivered ready for use

with a standard three-point linkage for

connection to a tractor. The spread rate itself

can be regulated in three ways or by

combining these:

• The oil flow to the hydraulic motor is

increased-reduced with the settings on

the tractor for this (A).

• Regulate the oil flow to the hydraulic

motor with a stepless control valve that

is mounted between the hydraulic

motor and the tractor's oil system.

(Accessories).

• The quantity can also be adjusted with

the handle (C) by setting it in different

positions during the use.

Parking - provided before joining

The support legs are placed in the farthest

position so that the front wall of the sand

spreader (K) is as vertical as possible before

connection to the tractor.

The sand spreader can also be filled when it

is in this position.

Make sure that the spreader stands firmly on

a hard surface so that it cannot tip over and

cause damage during storage.

Connection

Check that no one is standing between the

tractor and the machine during connection.

Make sure that no pinching damage occurs

during the connection.

Hydraulic hoses, safety

Check the hose connections if they are not

stretched or cut during the use. Tighten loose

hose connections and secure/fasten the

advance of the fasteners.

Failure to secure hydraulic hoses can cause

leaks and damage to the tractor and its

components.