Datapath Aligo Skrócona instrukcja obsługi - Strona 3

Przeglądaj online lub pobierz pdf Skrócona instrukcja obsługi dla Konwerter mediów Datapath Aligo. Datapath Aligo 7 stron.

Drukuj stronę
Aligo Quick Start Guide
HOW TO CONNECT THE ALIGO QTX100 AND ALIGO RX100
Connect the Aligo QTX100 to a mains power supply.
Connect up to four graphic outputs from your video sources to the HDMI input connectors on
the rear of the Aligo QTX100. Note: Where only one input is required, then input 1 must be used
first before using inputs 2-4. Input 1 must always be connected to a valid HDMI source in order to
function correctly, and you can only use inputs 2, 3 or 4 when using input 1.
Connect SFP+ transceiver modules into the 10Gb SFP+ cages on the front panel of the Aligo
QTX100, then connect an OM3 (minimum) fiber cable into each SFP+ module and connect the
other end to the network switch using another SFP+ module at the switch end. We recommend
using the same manufacturer model and grade of SFP+ module at both ends of the link. Note:
An SFP+ module and 10Gb network connection is required for each HDMI channel i.e. if all four
HDMI inputs are used, then all four network connections must be connected.
Ensure that the switch port chosen has been configured to use the same Local Area Network (LAN/
VLAN) as the active Aetria Network Manager server (see Aetria Network Manager Quick Start Guide
for more information).
Now connect an Aligo RX100 into a spare switch port which has also been configured onto the
same LAN/VLAN as the Aligo QTX100 devices and the active Aetria Network Manager server.
Connect the Aligo RX100 using the 10Gb SFP+ port located on the rear panel.
Connect the Aligo RX100 HDMI output ports to the display devices. Note: Where only one output
display is required, then output 1 must be used first before using outputs 2-4. Output 1 must always
be connected to a valid HDMI sink in order to function correctly, and you can only use outputs 2, 3
or 4 when using output 1.
Repeat as necessary for all Aligo devices required in the system, connecting all endpoints to the
switch, or switches such that they appear on the same Local Area Network.
Where KVM functionality will be required, connect the USB Type-B ports on the Aligo QTX100
into spare USB ports on the source PC's that you wish to control. For more information on how to
configure OneControl KVM feature please see separate Aetria documentation.
When connecting USB and HDMI ports to the source PC's for KVM control, care should be taken
to ensure that each USB channel matches its relative video channel in each case. i.e. USB1 should
connect to the same source as HDMI1 video, USB4 to HDMI4 etc.
4
Aligo Quick Start Guide
ALIGO QTX100 REAR PANEL
MODEL 220
1
MADE IN
ENGLAND
USB
1
1
2
1
USB Type B connectors - KVM port for connecting to a USB host PC
2
HDMI input connectors - Connect up to four video sources to the Aligo QTX100
3
Mains power switch
1G
10G
4
Mains power connector
1 (4K)
Media
Utility
ALIGO QTX100 FRONT PANEL
5
MODEL 220
1
MADE IN
ENGLAND
5
10Gb SFP+ Networked Video Transmit Ports.
USB
2 x 1Gb RJ45 Ports – for future use
6
Please speak to Datapath commissioning representative for further details
2
3
4
INPUTS
100-240V
1A MAX 50/60Hz
1A FUSE
Power
2
3
4
Power
Link
Video
O /On
Audio Out
Power
Made
in the
UK
12V DC
RX100
2
3
4
HDMI Outputs
6
2
3
4
INPUTS
100-240V
1A MAX 50/60Hz
1A FUSE
5