Datapath ALIGO QTX100 Skrócona instrukcja obsługi - Strona 9
Przeglądaj online lub pobierz pdf Skrócona instrukcja obsługi dla Odbiornik Datapath ALIGO QTX100. Datapath ALIGO QTX100 12 stron.
Również dla Datapath ALIGO QTX100: Skrócona instrukcja obsługi (7 strony)
Drukuj stronęAligo Quick Start Guide
STEP 2 CONFIGURING ALIGO DEVICES WITHIN AETRIA
Check Device Connections and Network Configuration
First, double check all Aligo devices are connected to the network switch and to their respective video sources
and displays as above before proceeding.
Also ensure that all Aligo devices are on the same Local Area Network (LAN/VLAN) as the Aetria Network
Manager server. This will have been pre-configured by Datapath and should be connected, powered up and
running before going any further.
Once all Aligo devices are connected and powered up, you can verify each device is ready to connect by
checking the link LED is flashing (as per the table on page 7), indicating that it is ready and waiting to be
provisioned within Aetria.
Aligo Device Discovery (Provisioning)
On any machine connected to the Aetria Network, open up a web browser and navigate to the Aetria login
page by following the login instructions. Enter user credentials.
Once within the Aetria Command Center, go to the Manage tab, and select Hardware Configuration.
Then click on Provisioning (highlighted right) to discover the new Aligo sources and add them to the system.
Under the All Devices panel, you will find any new Aligo devices that have been provisioned on the network.
Once a device has been successfully provisioned, the link LED on each device will be in a solid ON state.
From this point on please refer to the Aetria Command Center Quick Start Guide for further details on using
the system.
9