Dataprobe 8P-MAS Instrukcja obsługi - Strona 3

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Przełącznik Dataprobe 8P-MAS. Dataprobe 8P-MAS 8 stron. 8 position menu activated switch

Model 8P-MAS

At this point the Master Port is connected through to the port selected. The 8P-MAS is passive to the

messages sent between the Master Port and the port selected. To terminate the session with the

current port and bring back the menu, enter the escape character plus the security code and another

escape character. i.e.

Local Configuration

A configuration menu is used to set most operational features of the 8P-MAS.

1) DEVICE LABELS

2) PASSWORD

3) BAUD: 9600

4) PARITY/DATA: N,8

5) LEAD CTL: N

6) MODE: MODEM

7) TIMEOUT: 0

X) EXIT

ENTER >

Device Labels

This allows changing of the screen labels for the ports and power control outlets.

A) PORT A

B) PORT B

C) PORT C

D) PORT D

E) PORT E

F) PORT F

G) PORT G

H) PORT H

X) EXIT

ENTER LABEL # (A-D) >

Enter the label to be changed. The current label is displayed along with a prompt for the new name.

Type in a new label and then confirm the selection as shown below. Labels can be up to 20 characters.

TEST

Page 3